DSL 1500 ,welche TCP Settings soll ich nehmen ?

[xehh]

Hiho ,
ich hab offiziell DSL 2048 ,empfange aber nur ~DSL 1500.

Ergebniss von SpeedGuide.net :

TCP options string = 020405ac01010402
MTU = 1492
MTU is optimized for PPoE DSL broadband. If not, consider raising MTU to 1500 for optimal throughput.
MSS = 1452
MSS is optimized for PPPoE DSL broadband. If not, consider raising your MTU value.
Default TCP Receive Window (RWIN) = 65535
RWIN Scaling (RFC1323) = 0 bits
Unscaled TCP Receive Window = 65535

Note: TCP 1323 Options need to be enabled for RWIN over 2^16 (65535).
For optimum performance, consider changing RWIN to a multiple of MSS.
Other RWIN values that might work well with your current MTU/MSS:
63888 (up to 2 Mbit lines, depending on latency. MSS * 44)
127776 (1-5 Mbit lines, depending on latency. MSS * 44 * 2)
255552 (2-14 Mbit lines, depending on latency. MSS * 44 * 2^2)
511104 (8-30 Mbit lines, depending on latency. MSS * 44 * 2^3)
1022208 (25-60 Mbit lines depending on latency. MSS * 44 * 2^4)
bandwidth * delay product (Note this is not a speed test):

Your TCP Window limits you to: 2621 kbps (328 KBytes/s) @ 200ms
Your TCP Window limits you to: 1049 kbps (131 KBytes/s) @ 500ms
MTU Discovery (RFC1191) = ON
Time to live left = 109 hops
TTL value is ok.
Timestamps (RFC1323) = OFF
Selective Acknowledgements (RFC2018) = ON
IP type of service field (RFC1349) = 00000000 (0)

Ergebniss von Speed.io :

DL : 1448kBit/s
UPL : 188kBit/s
Ping : 56
Connections/minute : 1256


Wie hoch soll ich meinen Rwin Wert einstellen ?

[xehh]

« SpeedGuide.net TCP Analyzer Results »
Tested on: 11.20.2008 08:05
IP address: 84.159.xxx.xxx

TCP options string: 020405ac0103030001010402
MSS: 1452
MTU: 1492
TCP Window: 63888 (multiple of MSS)
RWIN Scaling: 0 bits
Unscaled RWIN : 63888
Recommended RWINs: 63888, 127776, 255552, 511104, 1022208
BDP limit (200ms): 2556kbps (319KBytes/s)
BDP limit (500ms): 1022kbps (128KBytes/s)
MTU Discovery: ON
TTL: 45
Timestamps: OFF
SACKs: ON
IP ToS: 00000000 (0)


Danke
Hier die neuen Werte .